AirPods have gained immense popularity since their inception, mainly because they are easy to use. The task of untangling earphone cords has been made easier by technical advancements. AirPods are wireless earphones announced by Apple alongside the iPhone 7. Let’s look at the common issue of why your AirPods won’t flash white.
Since AirPods uses wireless technology, it might be difficult to know what to do when something goes wrong. Fortunately, most issues have an easy answer, and there are a few extra tactics you may try if your troubles linger.
This post will answer all of your queries about how to make malfunctioning AirPods operate and how to make them flash white. Several more questions have been addressed. Continue reading to have a complete understanding.
Why Is My Airpods Pro Not Flashing White?
No matter what model you own, your AirPods won’t flash white because of the same reasons mentioned above. But if you’ve tried everything and it’s still not working, contact AppleCare or visit your local Apple store.
Why Won’t The Light On My Airpods Turn On?
The AirPods case’s LED flashes white to indicate that your AirPods are in pairing mode. This allows other devices like your phone to discover your AirPods. However, they may be unable to enter pairing mode automatically in some cases. This is why your AirPods won’t flash white.
Other than that, if your AirPods won’t flash white after manually putting them in pairing mode. The bottom tips of your AirPods may be clogged or obstructed by dirt, or the charging pins placed in the case may require cleaning.
Airpods Won’t Go into Pairing Mode
There are several reasons why your AirPods may be having difficulty associating with your Bluetooth devices. Among the probable explanations are:
- The charging of the battery is low.
- Bluetooth has been switched off or is not functioning correctly.
- Possible debris on the AirPods or charging case.
- The device might need a software update.
- The hardware of Airpods or charging case might be damaged.
How Do You Make Your Airpods Flash White?
Even if your devices are completely charged, the most common solution is to charge your AirPods and charging case for 15-30 minutes. After around 30 minutes of charging, put them in pairing mode by opening the AirPod case lid and pushing and holding the button on the rear until your Airpods flash white.
Second, if the AirPods still don’t function properly, most users will clean them and their cases. The charging connections should be cleaned. To clear any dirt, a cotton swab will come in handy. The debris might be the cause of your AirPods not flashing and preventing them from resting on the charging pins of the casing. You should also clean the bottom tips of the AirPods, which you may accomplish with a microfiber cloth.
AirPods can simply connect to Apple devices as well as other gadgets. However, the AirPods require an active Bluetooth signal to function. If the Bluetooth signal is lost, the AirPods won’t flash white. Most products make it simple to connect to Bluetooth. For example, all you need to do on your iPhone or iPad is: Go to Settings and then Bluetooth.
When they do not make touch with the charging pins, this is a fairly typical reason why AirPods won’t flash white. Enter pairing mode by pressing down on the AirPods while in the case. Make sure the bottom of the AirPods is in touch with the charging pins.
How To Reset Airpods?
AirPods can become stuck in pairing mode, where the status light continues to glow white and the charging case button becomes unresponsive. If this happens to you, attempt to reset your AirPods so that they enter pairing mode.
- Go to your device’s Bluetooth settings, look for the AirPods you want to connect with your device, and then select “Forget this Device.”
- Open the case and place both AirPods inside.
- Hold down the little setup button on the back of the case for 10-20 seconds, or until the status light begins to blink amber.
- Once the status light blinks amber three times, release the setup button.
- Hold down the setup button until the status light becomes white.
- Your AirPods should be listed in your device’s Bluetooth settings. The auto-pairing should begin if you’re using an iPhone or iPad.
Airpods Case Light Not Turning On At All
The different color lights signify different things on the AirPods. For example:
- The AirPods are being charged, if the amber light is on with your AirPods are in their case.
- If you see a green light and your AirPods are in their case. The AirPods have been charged.
- The AirPods case has less than one full charge left on its AirPods when an amber light appears and your AirPods are not in their case.
- When your Airpods are not in the case, and you see a green light, the AirPods case still has at least one full charge left for its AirPods.
- An amber light means that your AirPods are attached to a charger, it means that your AirPods are charging.
- The green light comes on while your AirPods are charging, it means your AirPods are completely charged.
- A white flashing light means that your AirPods have been reset and are now ready to connect to your iPhone, iPad, Mac, or another device.
- If you observe an amber flashing light, do the following: Your AirPods have experienced a pairing problem and must be reset.
But what if the AirPod case light never turns on?
- If there is no light, your AirPods and case are dead and must be charged. Charge it to see the lights turn on.
Why Is One Of My Airpods Charged But Not The Other?
The most common cause of charging troubles is a blockage in the Case’s charging port or debris on the bottom tip of the Airpods. This interferes with the Airpods’ ability to connect to the charging pins on the case.
A simple issue such as why your AirPods won’t flash white can be easily resolved, but if your AirPods have broken hardware or any internal issue, it can only be resolved by the Apple support center.
If you have a warranty on the AirPods, they may as well replace them. Please share an alternative solution in the comments section below if you have an alternative solution.
Apple Inc. started the revolution towards TWS headsets with the launch of Apple Airpods. They have made our life so much easier due to wireless connectivity. Well, we don’t need to worry about the wires anymore, but it’s a concern when you come across Airpods flashing white issue.
Apple Airpods regardless of model, flash white, orange, green, and amber lights to depict the status of their connection and charging status. Sometimes, Airpods do keep flashing lights despite being connected to the mobile device. This is an indication that something is wrong with your Airpods.
This is annoying, but feel no pressure, as this article explains everything about AirPods flashing lights. Just relax, sit back, and read our article thoroughly, so that you can understand and resolve your issue instantly.
Why is the light on my AirPods blinking white?
Airpods keep blinking white light when they are unable to connect with mobile devices for some reason. There could be many reasons behind the issue, such as:
- Low battery,
- Outdated firmware,
- Bluetooth is turned off on your mobile.
Whenever you see AirPods flashing white light, you would not be able to connect them. Whatever the issue is, we will help you solve it.
AirPods flashing white then orange
- Airpods flashing white light means they are ready to pair with the device.
- While AirPods flashing orange in normal conditions means they are on charge mode and will turn to green light upon completing.
- Airpods show either orange or amber lights on charge mode, which will remain steady until it goes to full.
If your Airpod blinks white light first, then suddenly turns to red or orange, it is not a good sign for you. During white light, Airpod tries to pair up with the device, but if some error occurs then it will show an orange light to indicate the fault.
AirPods flashing green
- Airpods flashing green light is a good sign just like the green traffic signal.
- It means that your Airpod has charged fully.
- When you charge the Airpod from the empty condition, the green light will turn on shortly upon the completion of charging, and then it will turn off.
If you open the fully charged case, it will cause the green light to stay on and illuminate for a longer period than the usual time. It is also worth mentioning that when Airpods blink green light, it also indicates the full charge capacity of the case along with the Airpod.
Green is a positive sign in life. So, you should embrace it with open arms in case of your Airpods.
AirPods flashing amber
- Amber is also known as orange or red color.
- So, when your Airpods flash amber light then there is a problem with your device.
- It means that your Airpod has some firmware problems in connecting to your Apple device.
Airpods also blink amber light, when their battery is drained out. If you see the amber light from the led on the Airpod’s case, it means the case charging is incomplete and needs to be fully charged to make it go away. This is the time to plug your case in.
Another condition could also occur when Airpods flash amber light. If you see amber light on the case while it is still plugged in, it means the case is charging and you don’t need to worry about it.
How do I stop my AirPods from flashing white?
There are two options you can choose from when your AirPods won’t stop flashing white light. The first thing you can do is to reconnect the earbuds with the device. The second option is the factory reset, which this article also covers.
The first option is easy and feasible for your Airpod to develop a connection again with the iPhone or iPad. You just need to open your Bluetooth setting, turn on the Bluetooth, pair with the Airpods, and Voila! The while light flashing will stop once you develop a connection successfully with your mobile device.
AirPods stuck in pairing mode
It is possible that when you try to choose the first option to make the white light stop flashing, your Airpods could stuck in pairing mode. In this case, you can go for option two, which emphasizes factory reset of your Airpods.
Before selecting the reset option, you should know that a pairing problem could also occur due to the following reasons:
- Debris on the Airpods and charging case
- Low battery
- Bluetooth is off on the mobile device
- Software update
- Hardware damage to the charging case or AirPods
How to reset AirPods?
If you face different issues like AirPods flashing white, orange, and green lights as well as getting stuck in the pairing mode, then using a factory reset option is the best choice as it can fix all the problems.
Resetting the AirPods settings can be an instant fix for all the common issues that could occur in your wireless device. Most importantly, the reset process can also solve battery-related issues and inconsistent audio. This technique works for all versions of Airpods when using a wireless case.
To perform the factory reset, do the following:
- First, place the AirBuds back in their case, close the lid for 30 seconds, and reopen it.
- On your iPhone, open “Settings,” then select the Bluetooth option.
- Select the “i” icon in the device option next to the AirPods’ name. In the AirPods menu, go to the Bluetooth option, select “Forget this Device,” and then confirm the option.
- Leave the charging case open while AirPods should remain inside and then hold the button on the back.
- Wait for the light on AirPod’s case to blink orange color, then release the button
- Once the AirPods disconnect from all the devices, wait for the white light to flash again.
- This will indicate that your reset process has been done successfully. Now reconnect the AirPods with your iPhone or iPad.
Why are my AirPods flashing white but not connecting?
AirPods Pro could also face similar problems to AirPods and AirPods Max in which their AirPods flashing white light keeps on blinking but does not connect with the mobile device. In this case, you can use similar techniques to solve the connecting issue.
First, you should disconnect the AirPods Pro from the device, and try to reconnect them. Still, the problem does not fix by reconnecting, do the factory reset of your AirPods Pro to fix the issues instantly.
AirPods button not working
Sometimes, the AirPods’ button could also be stuck and not work entirely. In this case, you can choose the similar reset option, as it is an effective method to resolve all AirPods-related problems. You can also try to check for debris in the case and clean it properly before resetting.
The Apple AirPods is an effective and needful invention that occurred in the tech industry. It has made our life much easier that we don’t need to worry about cables. Therefore, if some minor issues come to your AirPods, then you don’t have to feel pressure, as the article has elaborated each detail with utmost precision and accuracy. From flashing white, orange, green, and amber lights to pairing issues, the article has explained each step that can be followed to resolve the issues.