Airpods Won’t Flash White: How To Fix It?

Airpods won't flash white fix

Written by Jordan M

Mr. Jordon is a very experienced and expert WordPress blogger and always keen to share his knowledge and findings with other users to help them.

AirPods have gained immense popularity since their inception, mainly because they are easy to use. The task of untangling earphone cords has been made easier by technical advancements. AirPods are wireless earphones announced by Apple alongside the iPhone 7. Let’s look at the common issue of why your AirPods won’t flash white.

Since AirPods uses wireless technology, it might be difficult to know what to do when something goes wrong. Fortunately, most issues have an easy answer, and there are a few extra tactics you may try if your troubles linger. 

This post will answer all of your queries about how to make malfunctioning AirPods operate and how to make them flash white. Several more questions have been addressed. Continue reading to have a complete understanding.

Why Is My Airpods Pro Not Flashing White?

airpods won't flash white fix

No matter what model you own, your AirPods won’t flash white because of the same reasons mentioned above. But if you’ve tried everything and it’s still not working, contact AppleCare or visit your local Apple store. 

Why Won’t The Light On My Airpods Turn On?

airpods won't flash white. flashing white error fix

The AirPods case’s LED flashes white to indicate that your AirPods are in pairing mode. This allows other devices like your phone to discover your AirPods. However, they may be unable to enter pairing mode automatically in some cases. This is why your AirPods won’t flash white

Other than that, if your AirPods won’t flash white after manually putting them in pairing mode. The bottom tips of your AirPods may be clogged or obstructed by dirt, or the charging pins placed in the case may require cleaning.

Airpods Won’t Go into Pairing Mode

There are several reasons why your AirPods may be having difficulty associating with your Bluetooth devices. Among the probable explanations are:

  • The charging of the battery is low.
  • Bluetooth has been switched off or is not functioning correctly.
  • Possible debris on the AirPods or charging case.
  • The device might need a software update.
  • The hardware of Airpods or charging case might be damaged. 

How Do You Make Your Airpods Flash White?

Even if your devices are completely charged, the most common solution is to charge your AirPods and charging case for 15-30 minutes. After around 30 minutes of charging, put them in pairing mode by opening the AirPod case lid and pushing and holding the button on the rear until your Airpods flash white. 

Second, if the AirPods still don’t function properly, most users will clean them and their cases. The charging connections should be cleaned. To clear any dirt, a cotton swab will come in handy. The debris might be the cause of your AirPods not flashing and preventing them from resting on the charging pins of the casing. You should also clean the bottom tips of the AirPods, which you may accomplish with a microfiber cloth.

AirPods can simply connect to Apple devices as well as other gadgets. However, the AirPods require an active Bluetooth signal to function. If the Bluetooth signal is lost, the AirPods won’t flash white. Most products make it simple to connect to Bluetooth. For example, all you need to do on your iPhone or iPad is: Go to Settings and then Bluetooth.

When they do not make touch with the charging pins, this is a fairly typical reason why AirPods won’t flash white. Enter pairing mode by pressing down on the AirPods while in the case. Make sure the bottom of the AirPods is in touch with the charging pins.

How To Reset Airpods?

AirPods can become stuck in pairing mode, where the status light continues to glow white and the charging case button becomes unresponsive. If this happens to you, attempt to reset your AirPods so that they enter pairing mode.

  1. Go to your device’s Bluetooth settings, look for the AirPods you want to connect with your device, and then select “Forget this Device.”
  2. Open the case and place both AirPods inside.
  3. Hold down the little setup button on the back of the case for 10-20 seconds, or until the status light begins to blink amber.
  4. Once the status light blinks amber three times, release the setup button.
  5. Hold down the setup button until the status light becomes white. 
  6. Your AirPods should be listed in your device’s Bluetooth settings. The auto-pairing should begin if you’re using an iPhone or iPad.

Airpods Case Light Not Turning On At All

The different color lights signify different things on the AirPods. For example: 

  • The AirPods are being charged, if the amber light is on with your AirPods are in their case.
  • If you see a green light and your AirPods are in their case. The AirPods have been charged.
  • The AirPods case has less than one full charge left on its AirPods when an amber light appears and your AirPods are not in their case.
  • When your Airpods are not in the case, and you see a green light, the AirPods case still has at least one full charge left for its AirPods.
  • An amber light means that your AirPods are attached to a charger, it means that your AirPods are charging.
  • The green light comes on while your AirPods are charging, it means your AirPods are completely charged.
  • A white flashing light means that your AirPods have been reset and are now ready to connect to your iPhone, iPad, Mac, or another device.
  • If you observe an amber flashing light, do the following: Your AirPods have experienced a pairing problem and must be reset.

But what if the AirPod case light never turns on?

  • If there is no light, your AirPods and case are dead and must be charged. Charge it to see the lights turn on.

Why Is One Of My Airpods Charged But Not The Other?

The most common cause of charging troubles is a blockage in the Case’s charging port or debris on the bottom tip of the Airpods. This interferes with the Airpods’ ability to connect to the charging pins on the case.

Concluding Note

A simple issue such as why your AirPods won’t flash white can be easily resolved, but if your AirPods have broken hardware or any internal issue, it can only be resolved by the Apple support center.

If you have a warranty on the AirPods, they may as well replace them. Please share an alternative solution in the comments section below if you have an alternative solution.

Categories

Latest Similar Post

Regular Expression Tester

Regular Expression Tester

Regex is a useful string of characters that defines a search pattern. In the security world, regular expression plays a crucial role as a security...

Code Analysis Tools

Code Analysis Tools

When developing an application or any other software, the security of the finalized product is one of the major concerns faced by developers....

Bad Coding Practices

Bad Coding Practices

Sometimes the development teams employ unconventional practices to fix bugs or add new features without realizing the importance of design...

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *